HabilisDrawDT script

This is a script describing what's happening in the video of HabilisDrawDT. Colin Butler, the developer of the application, is the subject of the video. Colin is wearing a pair of gloves, each of which has a contact point on the thumb and index finger, giving four points in total.
  1. Colin begins by sliding a sheet of paper onto the work surface.
  2. He reaches out and picks up a pen with a pinching motion of his right forefinger and thumb.
  3. He draws an S-shape on the paper with the pen; the pen has a default ink color of blue.
  4. With his left hand, Colin picks up a bottle of blue ink and pours it on the paper with a touch.
  5. He pours ink from the blue bottle into an empty bottle on the lower part of his workspace.
  6. He puts the blue bottle down and picks up a bottle of white ink.
  7. By pressing down on the newly filled bottle of blue ink, he lightens that color by adding white to it. He then puts the white ink bottle down.
  8. Colin picks up the bottle of lightened blue ink and pours it onto the paper, then puts the bottle down.
  9. Using his right hand, Colin dips the pen he's holding into a bottle of yellow ink and draws a figure-8 on the paper. He puts down the pen.
  10. With his left hand, he touches the sheet of paper with two fingers and rotates it.
  11. Deciding that the paper should be realigned, he "bumps" the sheet against the edge of the workspace until it's aligned again, at 90 degrees from its former orientation.
  12. Colin drags the paper under the cutter and then touches the handle. The sheet has been cut in two.
  13. Colin drags each piece of paper back onto the main workspace, rotating the first piece as he does so, and moving the second piece on to the first in a T-shape.
  14. He picks up the tape dispenser and drags it over the boundary between the two pieces of paper. They're now attached as a single object.
  15. He picks up the paper and drags it to the trashcan.