Articles in Referred Professional/Technical Journals

1. Articles Submitted for Publication in Referred Professional/Technical Journals:

S.No	Article
8.	Mertol, H.C., Rizkalla, S., Zia, P. and Mirmiran, A., "Creep and Shrinkage Behavior of High-Strength Concrete for Bridge Structures," PCI Journal, December 2008.
7.	El-Hacha, R., Mirmiran, A., Cook, A. and Rizkalla, S., "Effectiveness of Surface-Applied Corrosion Inhibitors for Concrete Bridges," Submitted to ASCE Journal of Materials in Civil Engineering, November 15, 2008.
6.	Hassan, T., Lucier, G., Nelson, L. and Rizkalla, S., "Splice Strength of Large Diameter, High Strength Steel Reinforcing Bars," Submitted to ACI Structural Journal, November 2008.
5.	Frankl, B., Lucier, G., Hassan, T. and Rizkalla, S., "Behavior of Insulated Precast Prestressed Concrete Sandwich Wall Panels Reinforced with GFRP Grid," Submitted to PCI Journal, October 27, 2008.
4.	Hassan, T., and Rizkalla, S., "Analysis and Design Guidelines of Precast/Prestressed Composite Load Bearing Sandwich Wall Panels," Submitted to PCI Journal, October 2008.
3.	Jiang, G., Dawood, M., Peters, K. and Rizkalla, S., "Self-Monitoring Fiber Reinforced Polymer Strengthening System for Civil Engineering Infrastructures" , Submitted to Structural Health Monitoring Journal, August 2008.
2.	Dawood, M., and Rizkalla, S., "Environmental Durability of a CFRP System for Strengthening Steel Structures" , Submitted to Construction and Building Materials, November 2008.
1.	Mertol, H.C., Rizkalla, S., Zia, P., and Mirmiran, A., Flexural Design of High Strength Concrete Members submitted to ACI Structural Journal, April 2007.

 

2. Articles Published in Referred Professional/Technical Journals:

S.No	Article
129.	Rosenboom, O., Walter, C. and Rizkalla, S., "Strengthening of Prestressed Concrete Girders with Composites: Installation, Design and Inspection," Construction and Building Materials, Volume 23, Number 4, April 2009, pp. 1495-1507
128.	Sumpter, M., Rizkalla, S. and Zia, P., "Behavior of High-Performance Steel as Shear Reinforcement for Concrete Beams," ACI Structural Journal, Volume 106, Number 2, March/April 2009, pp. 171-177.
127.	Rizkalla, S., Zia, P., Mirmiran, A., Russell, H. and Mast, R., "Proposed Revisions to Extend Bridge Design Spcification to Concrete Compressive Strength up to 124 MPa", accepted for publication in the Transportation Record, 2009
126.	Logan, A.., Choi, W., Mirmiran, A., Rizkalla, S. and Zia, P., "Short-Term Mechanical Properties of High-Strength Concrete", Submitted to ACI Materials Journal, January 2009
125.	Lanier, B., Schnerch, S. and Rizkalla, S., "Proposed Design Guidelines for Strengthening of Steel Monopoles with High Modulus CFRP Materials", Submitted to Thin-Walled Structures, Elsevier, in press, 2009
124.	Dawood, M., Guddati, M. and Rizkalla, S., "Effective Splices for a CFRP Strengthening System for Steel Bridges and Structures", accepted for publication in the Transportation Research Record, 2009
123.	Mast, R., Dawood, M., Rizkalla, S., and Zia, P., "Flexural Design of Concrete Beams Reinforced with High-Strength Steel Reinforcing Bars", submitted to ACI Structural Journal, volume 105, Number 4, September-October 2008, pp 570-577.
122.	Mertol, H.C., Rizkalla, S., Zia, P. and Mirmiran, A., "Characteristics of Compressive Stress Distribution in High-Strength Concrete", ACI Structural Journal, Volume 4, September-October 2008, pp. 628-635
121.	Reis, E. and Rizkalla, S., "Material Characteristics of 3-D FRP Sandwich Panels", Construction and Building Materials, Volume 22, number 6, June 2008, pp. 1009-1018
120.	Rosenboom, O. and Rizkalla, S., "Modeling of IC Debonding of FRP Strengthened Concrete Flexural Members", ASCE Journal of Composites for Construction, Volume 12, number 2, March/April 2008, pp. 168-179.
119.	Schnerch, D. and Rizkalla, S., "Flexural Strengthening of Steel Bridges with High Modulus CFRP Strips", ASCE Journal of Bridge Engineering, Volume 13, number 2, March/April 2008, pp. 192-201.
118.	Hassan, T., Seliem, H., Dwairi, H., Rizkalla, S., and Zia, P., "Shear Behavior of Large-Size Concrete Beams Reinforced with High and Conventional Strength Steel", ACI Structural Journal, Volume 105, Number 2, March/April 2008, pp. 173-179.
117.	Rosenboom, O. and Rizkalla, S., "Experimental Study of IC Debonding in FRP Strengthened Beams", ACI Structural Journal, Volume 105, No. 1, January-February 2008, pp. 41-50.
116.	Hassan, T., Vickery, J. and Rizkalla, S., "Properties of Adhesives and CPVC materials proposed for steel tank lining", International Journal of Adhesion and Adhesives, Volume 28, Issues 1-2, January - March 2008, pp 77-90.
115.	Rizkalla S., Dawood, M. and Schnerch, D., "Development of a Carbon Fiber Reinforced Polymer System for Strengthening Steel Structures", Composites Part A, Volume 39, Issue 2, February 2008, pp. 388-397.
114.	Seliem, H., Lucier, G., Rizkalla, S., and Zia, P., "Behavior of Concrete Bridge Decks Reinforced with High-Performance Steel", ACI Structural Journal Volume 105, No. 1, January - February 2008, pp 78-86.
113.	Choi, W., Rizkalla, S., Zia, P., and Mirmiran, A., "Behavior and Design of High-Strength Prestressed Concrete Girder", PCI Journal, in press January 2008.
112.	Dawood, M., Rizkalla, S. and Sumner, E., "Fatigue and Overloading Behavior of Steel-Concrete Composite Flexural Members Strengthened with High Modulus CFRP Materials", ASCE Journal of Composites for Construction, Volume 11, Issue 6, November/December 2007 pp. 65-669.
111.	Rosenboom, O., Miller, A. and Rizkalla, S., "Repair of Impact-Damaged Prestressed Concrete Bridge Girders Using CFRP Materials", accepted for publication ASCE Journal of Bridge Engineering, October 2007.
110.	Dawood, M., Rizkalla, S. and Gleich, H., "CFRP Materials for Reinforced Concrete Structures", PCI Journal, Volume 52, No. 5, September-October 2007, pp. 27-29.
109.	Fam, A. and Rizkalla, S., "Laboratory Simulation of Impact Loading on Laminated Glass for Ice Hockey Arenas", Experimental Techniques, September/October 2007, pp. 46-52.
108.	Mertol, H., Rizkalla, S., Scott, P., Lees, J., and El-Hacha, R., "Durability of Concrete Beams Prestressed with CFRP Tendons", ACI Special Publication S245, "Case Histories and Use of FRP for Prestressing Applications", October 2007, pp. 1-20 CD.
107.	Schnerch, D., Dawood, M., Rizkalla, S., and Sumner, E., "Proposed Design Guidelines for Strengthening of Steel Bridges with FRP Materials", Construction and Building Materials, Vol. 21, No. 5, May 2007, pp. 1001-1010.
106.	Fawzia, S., Al-Mahaidi, R., Zhao, X.L., and Rizkalla, S., "Strengthening of Circular Hollow Steel Tubular Sections Using High Modulus CFRP Sheets", Construction and Building Materials, Construction and Building Materials, Vol. 21, No. 4, April 2007, pp. 839-845.
105.	Rosenboom, O., Hassan, T. and Rizkalla, S., "Flexural Behavior of Aged Prestressed Concrete Girders Strengthened with Various FRP Systems", Construction and Building Materials, Vol. 21, No. 4, April 2007, pp. 764-776.
104.	Hassan, T., Lucier, G., Rizkalla, S., and Zia, P., "Modeling of L-Shaped, Precast, Prestressed Concrete Spandrels", PCI Journal, Vol. 52, No. 2, March-April 2007, pp. 78-92.
103.	Lucier, G., Rizkalla, S., Zia, P., and Klein, G., "Precast L-Shaped Spandrel Beams Revisited: Full Scale Tests", PCI Journal, Vol. 52, No. 2, March-April 2007, pp. 62-77.
102.	Johnson, C., Mohamed, T. and Rizkalla, S., "Behavior of Three-Dimensionally Woven Glass Fiber Reinforced Polymeric Bridge Deck", Composites Research Journal, Vol. 1, Issue 2, Spring 2007, pp. 27-42.
101.	Schnerch, D., Dawood, M., Rizkalla, S., Sumner, E., and Stanford, K., "Bond Behavior of CFRP Strengthened Steel Structures", Advances in Structural Engineering, Vol. 9, No. 6, December 2006, pp. 805-817.
100.	Fam, A. Witt, S. and Rizkalla, S., "Repair of Damaged Aluminum Truss Joints of Highway Overhead Sign Structures using FRP", Construction and Building Materials,Vol. 20, No. 10, December 2006, pp. 948-956.
99.	Rosenboom, O. and Rizkalla, S., "Behavior of Prestressed Concrete Strengthened with Various CFRP Systems Subjected to Fatigue Loading", ASCE Journal of Composites for Construction, Vol. 10, No. 6 , November/December 2006, pp. 492-502.
98.	El-Hacha, R., Hossam, E. and Rizkalla, S., "Bond Characteristics of High-Strength Steel Reinforcement", ACI Structural Journal, Vol. 103, No. 6, November/December 2006, pp. 771-782.
97.	Fam, A. and Rizkalla, S., "Structural Performance of Laminated and Unlaminated Tempered Glass Under Monotonic Transverse Loading", Construction and Building Materials, Vol. 20, No. 9, November 2006, pp. 761-768.
96.	Fam, A., Schnerch, D. and Rizkalla, S., "Rectangular Filament-Wound GFRP Tubes Filled with Concrete under Flexural and Axial Loading: Experimental Investigation", Journal of Composites for Construction, Vol. 9, No. 1, January-February 2005, pp. 25-33.
95.	Fam, A., Mandal, S. and Rizkalla, S., "Rectangular Filament-Wound GFRP Tubes Filled with Concrete under Flexural and Axial Loading: Analytical Modeling", Journal of Composites for Construction,Vol. 9, No. 1, January-February 2005, pp. 34-43.
94.	Hassan, T. and Rizkalla, S., "Bond Mechanism of Near Surface Mounted FRP Bars for Flexural Strengthening of Concrete Structures", ACI STructural Journal, Vo. 101, No. 6, November-December 2004, pp. 830-839
93.	El-Hacha, R. and Rizkalla, S., "Near-Surface Mounted Fiber-Reinforced Polymer Reinforcements for Flexural Strengthening of Concrete Structures", ACI Structural Journal, Vol. 101, No. 5, September-October 2004, pp. 717-726
92.	Schnerch, D., Stanford, K., Sumner, E. and Rizkalla, S., "Strengthening Steel Structures and Bridges with High Modulus Carbon Fiber Reinforced Polymer, Resin Selections and Scaled Monopole Behavior", Transportation Research Record, No. 1892, August 2004, pp. 237-245.
91.	Fam, A., Qie, F. and Rizkalla, S., "Concrete-Filled Steel Tubes Subjected to Axial Compression and Lateral Cyclic Loads", Journal of Structural Engineering, Vol. 130, No. 4, April 2004, pp. 631-640.
90.	Rizkalla, S., Hassan, T. and Hassan, N., "Design Recommendations for the use of FRP for Reinforcement and Strengthening of Concrete Structures", Journal of Progress in Structural Engineering and Materials, Vol. 5, No. 1, November, 2003, pp. 16-28.
89.	Abdelrahman, A., Mohamadien, M., Rizkalla, S., and Tadros, G., "Use of ACM in Rehabilitation Projects in Egypt", ACI Special Publications, SP-215, November 2003, pp. 361-372.
88.	Rizkalla, S. and Tadros, G., "FRP for Prestressing of Concrete Bridges in Canada", ACI Special Publications, SP-215, November 2003, pp. 75-90.
87.	Hutchinson, R., Tadros, G., Kroman, J., and Rizkalla, S., "Use of Externally Bonded FRP Systems for Rehabilitation of Bridges in Western Canada", ACI Special Publications, SP-215, November 2003, pp. 239-248.
86.	Demers, M., Popovic, A., Neale, K., Rizkalla, S., and Tadros, G., "FRP Retrofit of the Ring-Beam of a Nuclear Reactor Containment Structure", ACI Special Publications, SP-215, November 2003, pp. 303-316.
85.	Fam, A., Greene, R. and Rizkalla, S., "Field Applications of Concrete-Filled FRP Tubes for Marine Piles", ACI Special Publications, SP-215, November 2003, pp. 161-180.
84.	Fam, A. and Rizkalla, S., "Large Scale Testing and Analysis of Hybrid Concrete/Composite Tubes for Circular Beam-column Applications", Construction and Building Materials, Vol. 17, Issues 6-7, September-October 2003, pp. 507-516.
83.	Williams, B., Shehata, E. and Rizkalla, S., "Filament-Wound Glass Fiber Reinforced Polymer Bridge Deck Modules", Journal of Composite for Construction, Vol. 7, No. 3, August 2003, pp.266-273.
82.	Hassan, T. and Rizkalla, S., "Investigation of Bond in Concrete Structures Strengthened with Near Surface Mounted Carbon Fiber Reinforced Polymer Strips", Journal of Composite for Construction, Vol. 7, No. 3, August 2003, pp. 248-257.
81.	Fam, A., Flisak, B. and Rizkalla, S., "Experimental and Analytical Modeling of Concrete-Filled FRP Tubes Subjected to Combined Bending and Axial Loads", ACI Structural Engineering Journal, Vol. 100, No. 4, July-August 2003, pp. 499-509.
80.	Fam, A., Pando, M., Filz, G., and Rizkalla, S., "Precast Piles for Route 40 Bridge in Virginia using Concrete-filled FRP Tubes", PCI Journal, Vol. 48, No. 3, May-June 2003, pp. 32-45.
79.	Becque, J., Patnaik, A. and Rizkalla, S., "Analytical Models for Concrete Confined with FRP Tubes", Journal of Composites for Construction, Vol. 7, No. 1, February 2003, pp. 31-38.
78.	Svecova, D., Rizkalla, S. and Tadros, G., "Design of FRP Reinforced Concrete for Serviceability", ACI Special Publications, SP-210, "Deflection Control of the Future", 2003, pp. 149-173.
77.	Fam, A. and Rizkalla, S., "Confinement Model for Axially Loaded Concrete Confined by Circular Fiber-Reinforced Polymer Tubes", Discussion published in the ACI Structural Journal, Vol. 99, No. 3, May-June 2002, pp. 386-390.
76.	Rizkalla, S. and Hassan, T., "Effectiveness of FRP Techniques for Strengthening Concrete Bridges", Journal of the International Association for Bridge and Structural Engineering (IABSE), SEI2, Vol. 12, No. 2, May 2002, pp. 89-95.
75.	Bakis, C., Bank, L., Brown, V., Cosenza, E., Davalos, J., Lesko, J., Machida, A., Rizkalla, S., and Triantafillou, T., "Fiber-Reinforced Polymer Composites in Construction - State of the Art Review", Journal of Composites for Construction, Vol 6, No. 2, May 2002, pp. 78-87. (Received Honorable Mention for Best Paper Award for Applied Research in the Journal of Composites for Construction.)
74.	Fam, A. and Rizkalla, S., "Flexural Behavior of Concrete-Filled Fiber Reinforced Polymer Circular Tubes", Journal of Composites for Construction, Vol. 6, No. 2, May 2002, pp. 123-132.
73.	Gentile, C., Svecova, D. and Rizkalla, S., "Timber Beams Strengthened with GFRP Bars: Development and Applications", Journal of Composites for Construction, Vol. 6, No. 1, March 2002, pp. 11-20.
72.	Hassan, T. and Rizkalla, S., "Flexural Strengthening of Post-Tensioned Bridge Slabs with FRP Systems", PCI Journal, Vol. 47, No. 1, January 2002, pp. 76-93.
71.	Fam, A., Musiker, D., Kowalsky, M. and Rizkalla, S., "In-Plane Testing of Damaged Masonry Wall Repaired With FRP", Advanced Composites Letters Journal, Vol. 11, No. 6, 2002, pp. 277-283.
70.	Fam, A. and Rizkalla, S., "Confinement Model for Axially Loaded Concrete Confined by Circular Fiber Reinforced Tubes", ACI Structural Journal, Vol 98, No. 4, July-August 2001, pp. 451-461.
69.	Tennyson, R., Mufti, A., Rizkalla, S., Tadros, G., and Benmokrane, B., "Structural Health Monitoring of Innovative Bridges in Canada with Fiber Optic Sensors", Smart Materials and Structures Journal, Vol. 10, No. 3, June 2001, pp. 560-573.
68.	Fam, A. and Rizkalla, S., "Behavior of Axially Loaded Concrete-Filled FRP Tubes", ACI Structural Journal, Vol. 98, No. 3, May-June 2001, pp. 280-289.
67.	Eddie, D., Shalaby A. and Rizkalla, S., "Glass Fiber-Reinforced Polymer Dowels For Concrete Pavements", ACI Structural Journal, Vol. 98, No. 2, March-April 2001, pp. 201-206.
66.	Hassan, T., Mohamedien, M., Hassan, N., and Rizkalla, S., "Bond Performance of Different FRP Strengthening Systems", P.S. Engineering Research Journal, Vol. 5, No. 2, 2001, pp. 15-23.
65.	Shehata, E., Morphy R. and Rizkalla, S., "Fiber Reinforced Polymer Shear Reinforcement for Concrete Members: Behavior and Design Guidelines", Canadian Journal of Civil Engineering, Vol. 27, No. 5, October 2000, pp. 859-872.
64.	Hassan, T., Abdelrahman, A, Tadros, G., and Rizkalla, S., "Fiber Reinforced Polymer Reinforcing Bars for Bridge Decks", Canadian Journal of Civil Engineering, Vol. 27, No. 5, October 2000, pp. 839-849.
63.	Hassan, T., Rizkalla, S., Rihal, S., and Parmantier, D., "Segmental Precast Concrete Piles: A Solution For Underpinning", ACI Concrete International, Vol. 22, No. 8, August 2000, pp. 41-46.
62.	Soudki, K., Rizkalla, S. and Uppal, S., "Performance of Bridge Timber Ties Under Static and Fatigue Loading", Journal of Bridge Engineering, November 1999, pp. 263-268.
61.	Hassan, T., Rizkalla, S., Abdelrahman, A., and Tadros, G. "Design Recommendations for Bridge Deck Slabs Reinforced by FRP", ACI Special Publications, SP-188, November 1999, pp. 313-323.
60.	Shehata, E., Morphy, R. and Rizkalla, S., "FRP for Shear Reinforcement of Concrete Structures", ACI Special Publications, SP-188, November 1999, pp. 157-167.
59.	Hutchinson, R. and Rizkalla, S., "Shear Strengthening of AASHTO Bridge Girders Using CFRP Sheets", ACI, Special Publications, SP-188, November 1999, pp. 945-958.
58.	Rizkalla, S. and Labossiére, P., "Structural Engineering with FRP - In Canada", Concrete International, Vol. 21, No. 10, October 1999, pp. 25-28.
57.	Rizkalla, S. and Labossiére, P., "FRP Extends Service Life of Rehabilitated Infrastructure", Canadian Civil Engineer, September-October 1999, pp. 8-12.
56.	Mahmoud, Z., Rizkalla, S., and Zaghloul, E. "Transfer and Development Lengths of Carbon Fiber Reinforced Polymer Prestressing Reinforcement", ACI Structural Journal, Vol. 96, No. 4, July-August 1999, pp. 594-602.
55.	Abdelrahman, A. and Rizkalla, S., "Deflection Control of Concrete Beams Pretensioned by CFRP Bars", Journal of Composites for Construction, Vol. 3, No. 2, May 1999, pp. 55-62.
54.	Xie, Y., Rizkalla, S., Chan, H.C., and Kwan, A., "Linseed Oil-Based Concrete Surface Treatment for Buildings and Highway Structures in Hong Kong", Hong Kong Institution of Engineers, Vol. 6, No. 1, April 1999, pp. 36-41.
53.	Shehata, E. and Rizkalla, S., "Intelligent Sensing for Innovative Bridges", Journal of Intelligent Material Systems and Structures, Vol. 10, No. 4, April 1999, pp. 304-313.
52.	Rizkalla, S., Shehata, E., Abdelrahman, A., and Tadros, G., "A New Generation: Design and Construction of a Highway Bridge with CFRP", Concrete International, Vol. 20, No. 6, June 1998, pp. 35-38.
51.	Shehata, E., Rizkalla, S. and Stewart, D., "Roof Retrofit", Concrete International, Vol. 20, No. 6, June 1998, pp. 44-46.
50.	Domenico, N., Mahmoud, Z. and Rizkalla, S., "Bond Properties of Carbon Fiber Composite Prestressing Strands", ACI Structural Journal, Vol. 95, No. 3, May-June 1998, pp. 281-290.
49.	Michaluk, C., Rizkalla, S., Tadros, G., and Benmokrane, B., "Flexural Behaviour of One-Way Concrete Slab Reinforced by Fiber Reinforced Plastic Reinforcements", ACI Structural Journal, Vol. 95, No. 3, May-June 1998, pp. 353-365.
48.	Rizkalla, S., "Fiber Reinforced Plastic for Smart Bridge", Engineering Dimensions, March-April 1998, pp. 38.
47.	Abdelrahman, A. and Rizkalla, S., "Serviceability of Concrete Beams Prestressed by Carbon Fibre Reinforced Plastic Bars", ACI Structural Journal, July-August 1997, Vol. 94, No. 4, pp. 447-457.
46.	Hassan, N., Mohamedien, M. and Rizkalla, S., "Rational Model for Multibolted Connections for GFRP Members", Journal of Composites for Construction, May 1997, Vol. 1. No. 2, pp. 71-78.
45.	Hassan, N., Mohamedien, M., and Rizkalla, S., "Multibolted Joints for GFRP Structural Members", Journal of Composites for Construction, Vol. 1, No. 1, February 1997, pp. 3-9.
44.	Fam, A., Rizkalla, S. and Tadros, G., "Behavior of CFRP for Prestressing and Shear Reinforcements of Concrete Highway Bridges", ACI Structural Journal, January-February 1997, Vol. 94, No. 1, pp. 77-86.
43.	Maaskant, R., Alavie, T., Measures, R., Tadros, G., Rizkalla, S., and Guha-Thakurta, A., "Fiber Optic Bragg Grating Sensors for Bridge Monitoring", Cement and Concrete Composites Journal, No. 19, 1997, pp. 21-33.
42.	Xie, Y., Chan, H. C., Kwan, A. K. H., and Rizkalla, S., "Effects of QUV Artificial Weathering on the Performance of Linseed Oil-based Concrete Preservatives", Hong Kong Institution of Engineers Transactions(HKIE), October 1996.
41.	Soudki, K., West, J., Rizkalla, S., and Blackett, B.,"Horizontal Connections for Precast Concrete Shear Wall Panels Under Cyclic Shear Loading", PCI Journal, May-June 1996, pp. 1-9.
40.	Hassan, N., Mohamedien, M. and Rizkalla, S., "Finite Element Analysis of Bolted Connections for GFRP Composites", Composite Journal, Part B: Engineering, Vol. 27B, No. 3/4, 1996, pp. 339-349.
39.	Rosner, C. and Rizkalla, S., "Bolted Connections for Fibre Reinforced Composite Structural Members: Analytical Model and Design Recommendations", Journal of Materials in Civil Engineering of The American Society for Civil Engineers, Vol. 7, No. 4, November 1995, pp. 232-238.
38.	Soudki, K., Diakiw, B. and Rizkalla, S., "Horizontal Connections for Precast Concrete Shear Walls Subjected to Cyclic Deformation - Part 2: Prestressed Connections", PCI Journal, Vol. 40, No. 5, September-October 1995, pp. 82-96.
37.	Soudki, K., Leblanc, B. and Rizkalla, S., "Horizontal Connections for Precast Concrete Shear Walls Subjected to Cyclic Deformation - Part 1: Mild Steel Connections", PCI Journal, Vol. 40, No. 3, May-June 1995, pp. 78-96.
36.	Abdelrahman, A., Tadros, G. and Rizkalla, S., "Test Model for the First Canadian Smart Highway Bridge", ACI Structural Journal, Vol. 92, No. 4, July-August 1995, pp. 451-458.
35.	Tadros, G. and Rizkalla, S., "A Smart Highway Bridge in Canada", Concrete International, Vol. 16, No. 6, June 1994, pp. 42-44.
34.	Tadros, G. and Rizkalla, S., "First Canadian Highway Bridge Prestressed by Carbon Fibre Strands and Monitored by Optical Fibre Sensors", Canadian Civil Engineer, March 1994, pp. 7-15.
33.	Wright, J., Shen, Z. and Rizkalla, S., "A Three-Year Field and Laboratory Evaluation of Linseed Oil as a Concrete Sealer", Canadian Journal of Civil Engineering, Vol. 20, No. 5, October 1993, pp. 844-854.
32.	Erki, M. A. and Rizkalla, S., "Anchorages for FRP Reinforcement", Concrete International, Vol. 15, No. 6, June 1993, pp. 54-59.
31.	Erki, M. A. and Rizkalla, S., "FRP Reinforcements for Concrete Structures: A Sample of International Production", Concrete International, Vol. 15, No. 6, June 1993, pp. 48-53.
30.	Hutchinson, R., Lau, M., Heuvel, J. S., and Rizkalla, S., "Horizontal Post-Tensioned Connections for Precast Concrete Load Bearing Shear Wall Panels", PCI Journal, Vol. 36, No. 6, November-December, 1991, pp.64-76.
29.	Uppal, A. S., Pinkney, R. B. and Rizkalla, S., "An Analytical Approach for Dynamic Response of Timber Railroad Bridges", Canadian Journal of Civil Engineering, Vol. 17, No. 6, December 1990, pp. 952-964.
28.	Uppal, A. S., Rizkalla, S.and Pinkney, R. B., "Response of Timber Bridges Under Train Loading", Canadian Journal of Civil Engineering, Vol. 17, No. 6, December 1990, pp. 940-951.
27.	Polyzois, D., Charnvarnichborikarn, P., Wong, C., and Rizkalla, S., "Effect of Temperature and Galvanization on the Cold-Formed Angles", Canadian Journal of Civil Engineering, Vol. 17, No. 3, June 1990, pp. 440-451.
26.	Pincheira, J., Rizkalla, S. and Attiogbe, E., "Performance of Welded Wire Fabric as Shear Reinforcement under Cyclic Loading", ACI Structural Journal, Vol. 86, No. 6, November-December 1989, pp. 728-735.
25.	Serrette, R., Rizkalla, S., Attiogbe, E., and Heuvel, J.S.,"Multiple Shear Key Connections for Precast Shear Wall Panels", PCI Journal, March-April 1989, Vol. 34, No. 2, pp. 104-120.
24.	Foerster, H., Rizkalla, S. and Heuvel, J.S., "Behavior and Design of Shear Connections for Load Bearing Shear Wall Panels", PCI Journal, Vol. 34, No. 1, January-February 1989, pp. 100-119.
23.	Xuan, X. and Rizkalla, S., "Behaviour of Welded Wire Fabric as Shear Reinforcement under Cyclic Loading Conditions", The Journal of CIB, The International Council for Building Research, Studies and Documentation, United Kingdom, 1989.
22.	Attiogbe, E., and Rizkalla, S., "Response of Concrete to Sulphuric Acid Attack", ACI Material Journal, Vol. 85, No. 6, November-December 1988, pp. 481-488.
21.	Maruyama, K. and Rizkalla, S., "Shear Design Consideration for Pretensioned Prestressed Beams", ACI Structural Journal, Vol. 85, No. 5, September-October 1988, pp. 492-498.
20.	Xuan, X., Rizkalla, S. and Maruyama, K., "Effectiveness of Welded Wire Fabric as Shear Reinforcement in Pretensioned Prestressed Concrete T-Beams", ACI Structural Journal, Vol. 85, No. 4, July-August, 1988, pp. 429-436.
19.	Serrette, R. L., Rizkalla, S. and Heuvel, J. S., "Shear Resistance of Various Connections used for Precast Concrete Load-Bearing Shear Wall Panels", Transactions of the Japan Concrete Institute, Vol. 10, No. 3, 1988, pp. 739-744.
18.	Uppal, S. and Rizkalla, S., "Response of Timber Bridges under Train Loading", Transportation Research Record, National Research Council, Transportation Research Record, No. 1177, Washington, D.C., 1988, pp. 103-112.
17.	Xuan, X., and Rizkalla, S., "Shear Strength of Prestressed Concrete T-beams with Welded Wire Fabric as Shear Reinforcement", Discussion, PCI Journal, November-December 1987, Vol. 32, No. 6, pp. 142-143.
16.	Domaschuk, L., Kwok, R., and Rizkalla, S., "Inadequate Shallow Foundations", The Journal of CIB, The International Council for Building Research, Studies and Documentation, Building Research and Practice, United Kingdom, July-August 1987, pp. 224-230.
15.	Ray, A. and Rizkalla, S., "Transverse Stirrup Spacing in R/C Beams", Structural Engineering Journal, Vol. 113, No. 1, January, 1987, pp. 174-175.
14.	Maruyama, K. and Rizkalla, S., "Shear Behavior of Pretensioned Prestressed Concrete Beams", Transactions of the Japan Concrete Institute, Vol. 9, 1987, pp. 411-416.
13.	Tinkler, J., Del Frate, R. and Rizkalla, S., "The Prediction of Air Leakage Rates Through Cracks in Pressurized Reinforced Concrete Containment Vessels", International Journal of Pressure Vessels and Piping, Vol. 29, No. 1, 1987, pp. 33-46.
12.	McCullock, W. J., Militano, C. and Rizkalla, S., "Behavioral Load Testing of the Disraeli Facility", Canadian Journal of Civil Engineering, Vol. 14, No.1, 1987, pp. 103-110.
11.	Rizkalla, S., Saadat, F. and Higai, T., "Fundamental Characteristics and Behavior of Reinforced Concrete Bridge Piers Subjected to Reversed Cyclic Loading", Transportation Research Record 1044, National Research Council, December 1985, pp. 17-25.
10.	Rizkalla, S. and Keeler, R. K., "Precast Concrete in Remote Locations", Concrete International, Vol. 6, No. 11, November 1984, pp. 41-42.
9.	Rizkalla, S. and Hwang, L., "Crack Prediction for Members in Uniaxial Tension at Any Given Loading Stage", Journal of the American Concrete Institute, Vol. 81, No. 6, November 1984, pp. 572-579.
8.	Rizkalla, S., Simmonds, S. and MacGregor, J. G., "Cracking of P/C Nuclear Containment Structures", Structural Engineering Journal, Vol. 110, No. 9, September 1984, pp. 2148-2163.
7.	Higai, T., Omran, B., Saadat, F., and Rizkalla, S., "Shear Failure of R.C. Members Subjected to Large Deflection Reversals", Transactions of the Japan Concrete Institute, June 1984, pp. 505-508.
6.	Rizkalla, S., Lau, B. L. and Simmonds, S., "Air Leakage Characteristics in Reinforced Concrete", Structural Engineering Journal, Vol. 110, No. 5, May 1984, pp. 1149-1162.
5.	Rizkalla, S., Simmonds, S. and MacGregor, J. G., "Prestressed Concrete Containment Model", Structural Engineering Journal, Vol. 110, No. 4, April 1984, pp. 730-743.
4.	Rizkalla, S., Hwang, L. and El-Shahawi, M., "Transverse Reinforcement Effect on Cracking Behaviour of R.C. Members", Canadian Journal of Civil Engineering, Vol. 10, No. 4, December 1983, pp. 566-581.
3.	Keeler, R. and Rizkalla, S., "Rapid Erection of a Concentrate Loading Facility Using Pre-Cast Concrete in a Remote Location", Canadian Journal of Civil Engineering, Vol. 10, No. 3, October 1983, pp. 456-465. Summary of the paper also published in the PCI Journal, Vol. 27, No. 3, May-June 1982.
2.	Rizkalla, S. and Zia, P., "Segmentally Constructed Prestressed Concrete Hyperboloid Cooling Tower", PCI Journal, Vol. 25, No. 4, July-August 1980, pp. 146-160.
1.	Zia, P., Mirza, S. and Rizkalla, S., "Static and Fatigue Tests of Composite T-beams Containing Prestressed Tension Elements", PCI Journal, Vol. 21, No. 6, November-December 1976, pp. 76-93.

[ Top ]

Last updated: April 7, 2009 (dl)